kuken cooling tower fill, Kuken Square cooling tower pvc fill, Kuken PVC Film-fill media, Kuken filling pack
Material: Thermal Formed PVC
Application: square(cross flow) cooling tower
Sheet thickness: 0.25-0.45mm
Sheet gap: 19mm
Sheet width: 730mm 750mm 950mm
There are many forms and structures of cooling tower fill,also called cooling tower film fill, each type has its own characteristics to fit various applications. Cooling tower fill is to put water surface area in contact with air as much as possible, for the longest amount of time possible. Pvc fills allow the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.
This kind of PVC filler for Square Cooling Tower Parts with the advanced technical, long lifetime, low resistance, light weight. During the service, the fill can increase the water flow process. It is widely used in Square cooling tower. Characters acid – proof alkali – resisting anticorrosion for the organic solvent good performance of inflaming retarding Increasing cross-sectional area add water retention time.
Kuken cooling tower fills
Kuken cooling tower filler is made from PVC injection molding under high pressure,it has special structure form, not only certain stiffness, but some flexibility.
Due to good elasticity, the filler would chatter under the water-drop impact effect lead to some water drop rebound to above for water redistribution.
It has the advantages of direct replacement, performance enhancement, and water condition compatibility. Allow various heat loads, flow rates, water quality, and horse power combinations selections.