It isn’t known where yourcooling tower is used. Whether it is used within the central air-conditioning or industry for circulating cooling water, halting machine and direct labor cleaning. If it is the water therapy cooling tower, direct coping with silt in the system.
When we cleanfilling, the frequent strategies are to take apart the filling for cleaning or to scrub the filling circularly in the tower accordingto the different type. Infill of cross flow tower is well took apart, but the hanging sort is tough. The filling is took apart and soaked within the descaling potion about 2 minutes, lastly, cleaned up by water. There is one thing we should always listen to that most of potions include hydrochloric acid. So the soaking pool typically is the self-made FRP tank.
The hanging sort fillings of cross flow tower and counter flow tower are troublesome to take apart. In general, step one is to show off the return water inlet valve, if potential, sealing the inlet, after which putting the potion in the cooling tower water plate. The focus of potion needs to be managed properly with a view to avoid corroding pipe fittings and structural parts. A bit pump put into the water basin pumps the potion to the cooling tower higher, so as to make the spray type circulating cleaning for filling. And the cleansing would possibly circulate all day. What’s more, it’s essential to pay attention to the corrosion state of affairs of the pipe fitting and steel structural elements attributable to potion at any time and the safety of man and machine, and operation rigorously. There are particular cleaning brokers for cooling tower on the market and they also may be searched by internet. The FRP surface will be cleaned by water cannons. Don’t use water cannons to wash packing!!! The waste potion only can discharge after using the lime to neutralize, or it should does the great hurt to atmosphere.