» » Cooling Tower Fill Construction Standards

Cooling Tower Fill Construction Standards

posted in: Industry News | 0

Cross flow cooling tower fill construction standards

The top of the cooling tower packing and the lower end of the fan should be 1.2 times the fan diameter.

Counter flow cooling tower fill construction standards

  1. In the construction of counter-current cooling tower, the top of the filler and the airflow segment angle should be controlled within 90 degrees, the use of flat roof, under the guide ring, water collector and airflow segment angle control in 90-120 degrees
  2. the cooling tower top is shrinkage , the top of the contraction section cover should be controlled in the 90-110 degrees
  3. Cooling tower  fill angle control in 5-8 degrees
  4. In the course of use, in order to prevent the air and the bottom of the filler-to-surface short-circuit, should be set up alternate flow measures

cooling-tower-fill

Comments are closed.