» » » Sprial Nozzle for Desulfurization Tower

Sprial Nozzle for Desulfurization Tower

posted in: Cooling Tower Nozzle | 0

Spiral nozzle (SPJT) is also called Desulfurization nozzle, anti-clogging nozzle, large flow nozzle, dust nozzle. is a solid cone or hollow conical spray nozzle, jet angle range of 60 degrees to 170 degrees, the conventional 120 degrees. In the 3 bar pressure, the liquid flow rate range of 5.5 to 140 liters / min, is widely used in flue gas desulfurization dust, waste gas treatment,desulfurization tower waste water treatment, fire fighting, spray cleaning and other fields.

Spiral nozzles can be installed or updated on most piping systems. Available nozzles are available in NPT or BSPT (external) type. Spiral nozzles are available in inch male thread sizes and require internal threads to fit adapter or special machining customization. Contact your company sales person if necessary. Typically, 1/4 in. To 4 in. Nozzles can be made of brass, 316 stainless steel castings, PVDF, 95 ceramic, silicon carbide, Teflon Teflon or PVC, respectively, of 316 stainless steel castings, polyvinyl chloride , 95 ceramics, silicon carbide are equipped with a large number of stocks, Han Bo environmental commitment, with the conventional products to be made. For use in special areas, can also be used other materials

mist-sprial-nozzle-for-desulfurization-tower

pp sprial nozzle specification:

Material: PP

Specific gravity: 0.9 to 0.91 g / cc

Shrinkage: 1.0 to 2.5% Molding temperature: 160 to 220°C


Features: non-toxic, tasteless, low density, strength stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used in about 80. Has good electrical properties and high-frequency insulation from humidity, Crisp, not wear, easy to aging. Spiral nozzle made of PP material used at room temperature, no need to wear the environment.

sprial-nozzle

If you have any question about sprial nozzle.  My email: ann@longtimefrp.com

Comments are closed.